Hi Guys, I experimented with loads of different ex' systems as I was at a noise sensitive strip....the best solution is twin pipes, perforated at the end and 50% crimped, inside "cans" that were also perforated......picture attached. There are two designs here, the one with the red heat mu...

Hi Guys, My two peneth: The Citroen 2cv uses is similar pump, it is low profile, in its assembled form the fuel pipes are in the wrong position, but I believe it is a simple operation to remove the top body and rotate it, the bolts are in an arrangement that will allow this. The QH pump has part pla...

Hi James,
Sorry, I should have updated the post. Yes, the engine sold about a week ago.
Best wishes
Neil

Hi David,

I have a complete original set of calipers for the Nipper if you still need them.

Regards

Neil

Hi Jim, Try these people, they are very good: https://www.gsparkplug.com/?gclid=Cj0KCQiAtJeNBhCVARIsANJUJ2EwrKvjmsiLEBeyzfG2ObDL_faD0Uy-v56YJxg7xP7mFxBN409gwaYaAs7XEALw_wcB For Leburg make sure you set the gaps at 0.9 to 1.0mm. Make sure you don't allow the ignition to fire without a plug in the lea...

Hi Ronald, Yes, the top hat is made from 4130 and requires welding together. Only one 1080 bungee required. I am looking into an alternative to the Neiman rings for the nose gear, just need to do a load test and put a mod' request in! The LAA are abysmally slow in processing mod's. The nose gear Nei...

Hi Sven,
I am sorry that I have not replied sooner, I am not getting notifications of messages for some reason.
Please send me pictures of the breather system you have now.
Send direct to
nspooner@me.com
Regards

EFS 3 is too big. You need an EFS 2
Regards
Neil

Hi,
You will need to change the “top hat” on the top of the nose leg which I can supply for £125. You will need to get the 1080 bungee.
I am having trouble getting the modification paperwork from the LAA at the moment, but hopefully will have it soon.
Regards
Neil

Hi,
Sorry, only just found your message. Yes, still available, but I have offered it to someone else. I will get back to you. I do have the parts to build another one, it could include the CBR alternator but without the Leburg controllers & coils.
Regards
Neil

Lower engine.

Some photos of top side.

Front cover for oil pump: https://www.ebay.co.uk/itm/303813309820?fits=Car+Make%3AVW&hash=item46bcaf357c:g:q5sAAOSwsttf2itL The Raven system is fine, you will only need the oil change over valve. The ports on the top of the engine you refer to are part of the pressurised system. The easiest opti...

....the last picture Paul posted....what a young Barry Smith !

Hi Sven, I am currently away from home so using a horrible iPhone to type...slow & tedious, plus I don’t have access to all the photos. Anyway: Oil systems: Oil Feed: I have found a supplier for a front cover for the oil pump, which is actually designed for an external oil feed to a cooler, but,...