Rudder circuit bungees

[Peter C]

I am missing the bungees that go from the rudder pedals to the fuselage frame on SE-FUT. From the drawings the bungees appear to be 3/8” diameter, however no lengths are given on the drawings. I plan to make these from 3/8” aircraft bungee cord and hook fittings. Does anyone know how long these should be, or perhaps more useful, what tension is required? I have the original all flying rudder and guess there needs to be a reasonable tension in these bungees in order to centralise the rudder in flight.

Regards
Peter
SE-FUT

[Neil Spooner]

Hi Peter,
Did you get the info' you needed for the bungees?
Regards
Neil

[G-BLMW]

Hi Peter

A picture speaks a thousand words hope this helps, bungee is at its free un-tensioned length.

IMGP2593.JPG (1.07 MiB) Viewed 6897 times

Regards
Stuart

[Peter C]

Hi Stuart,

I made and fitted the bungees a couple of months ago after you posted the picture on one of the other threads. Thanks again for the information

Peter
SE-FUT

[G-BLMW]

Doh!! ............ senior moment. Glad you got it sorted .

Stuart