Nose leg to Bungee mod

Use this forum to discuss technical points relating to the Nipper and its ancilliaries.
Dellboy
Posts: 6

Nose leg to Bungee mod

Postby Dellboy » Sat Jun 17, 2017 6:34 pm

Hi all,I need a little help on the paperwork side of things just collected my fuselage back from Airweld after receiving a few welds jigging and Fin /Rudder mod no 11712
also had the nose leg converted to accept Bungees in place of Neiman Rings however we are still looking for the Mod number for this to cover the paperwork if anyone has it may save a lot of time and searching
Nigel

User avatar
G-NIPR
Site Admin
Posts: 212
Location: INVERNESS, SCOTLAND
Contact:

Re: Nose leg to Bungee mod

Postby G-NIPR » Thu Jun 22, 2017 9:03 am

Hi Nigel,
To my knowledge my Nipper is the first, and to date only, to have this mod incorporated.
It was also done by Airweld.
The mod number I have on record is: 14065.
Good luck. The mod works well.

Paul.
G-NIPR.

Dellboy
Posts: 6

Re: Nose leg to Bungee mod

Postby Dellboy » Sat Jun 24, 2017 4:18 pm

Thanks for that Paul

Dellboy
Posts: 6

Re: Nose leg to Bungee mod

Postby Dellboy » Mon Aug 07, 2017 7:39 pm

Hi Paul,
Re the nose leg mod 14065, would you be able to forward on a copy of the proposal paperwork presented to laa if you have it, also is there a shock cord ring number I can get from Las
Many thanks
Nigel

G-BRIK
Posts: 10

Re: Nose leg to Bungee mod

Postby G-BRIK » Wed Feb 28, 2018 8:10 pm

Hi Paul

I’m wondering if you could post some photos of your nose wheel bungee mod and any details of mod 14065. I’ve requested the info from the LAA, but to date they unfortunately don’t seem to be able to locate it.

Kind Regards
Gary
the flying BRIK

User avatar
G-NIPR
Site Admin
Posts: 212
Location: INVERNESS, SCOTLAND
Contact:

Re: Nose leg to Bungee mod

Postby G-NIPR » Wed Feb 28, 2018 8:20 pm

Hello guys,
Sorry I missed the previous question about this.
Please contact Paul Grellier at AirWeld, near Winchester.
He has all the info you need, and probably also the drawings.
He will also advise the part number as supplied by LAS.
He is a nice guy and always happy to help.
Good luck.

Paul.
G-NIPR.

G-BRIK
Posts: 10

Re: Nose leg to Bungee mod

Postby G-BRIK » Thu Mar 01, 2018 7:29 pm

Hi

Thanks. I’ll give Paul a call.

Kind Regards
Gary

Neil Spooner
Posts: 548
Location: Ardleigh, Colchester, Essex, UK
Contact:

Re: Nose leg to Bungee mod

Postby Neil Spooner » Mon Nov 30, 2020 8:09 am

Hi Gary,
Did you get any joy with the mod' details for the nose leg bungee mod' please.......I have 3 Nippers that need it!
Neil
A little help goes a long way.
Nipper G-BRPM and G-BALS
RV4 G-IKON


Return to “ENGINEERING AND MAINTENANCE”

Who is online

Users browsing this forum: Google [Bot] and 4 guests