During all the kerfuffle of getting my Nipper back into the air I've misplaced the trim spring that lives at the base of the stick. Has anybody got a spare they would be willing to part with. I didn't get a reply from Airweld, I'll try again, otherwise I'll have to make one.
Jim
Trim spring
-
- Posts: 625
- Location: Ardleigh, Colchester, Essex, UK
- Contact:
Re: Trim spring
Hi Jim,
Are you still in need of the spring?
Regards
Neil
Are you still in need of the spring?
Regards
Neil
A little help goes a long way.
Nipper G-BRPM and G-BALS
RV4 G-IKON
Nipper G-BRPM and G-BALS
RV4 G-IKON
-
- Posts: 145
Re: Trim spring
Hi Neil,
I can give you a firm perhaps on that. I have one on its way in the post but I won't know if it's correct until it turns up. A comment from a friend who had a friend who thought he had one made me unsure - a touch of Chinese whispers in the conversation. I shall find out at the speed of post.
Regards
Jim
I can give you a firm perhaps on that. I have one on its way in the post but I won't know if it's correct until it turns up. A comment from a friend who had a friend who thought he had one made me unsure - a touch of Chinese whispers in the conversation. I shall find out at the speed of post.
Regards
Jim
-
- Posts: 145
Re: Trim spring
Hi again,
Posted spring is correct and is fitted.
Thanks to anyone who scrabbled through their bits box to check.
Jim
Posted spring is correct and is fitted.
Thanks to anyone who scrabbled through their bits box to check.
Jim
Return to “ENGINEERING AND MAINTENANCE”
Who is online
Users browsing this forum: Google [Bot] and 7 guests