G-AVKI

Introduce yourself to the group.
mike newall
Posts: 12

G-AVKI

Postby mike newall » Thu Sep 04, 2008 11:17 pm

She is nearly back in the skies after 20 years !

My Bro recently bought her from Mick Greenway who has done a very competent rebuild. As ever, there are several things to be completed, but we should be in the air shortly - don't call me shortly as I am too tall to fly the damn thing - I jam my knees under the spar and can't get full pedal travel so will probably limit myself to a couple of circuits before relinquishing my share back to Bro.

Ray (bro) was RAF pilot, then ATC, then Civvy ATC, then RAF ATC, then Flight Checker, now retired. I am an A330 Captain for Thomas Cook at MAN, have just sold a Citabria (12th aeroplane) and my Bro and I are 90% through a Vans RV7 - God knows why he bought the Nipper !

We are based in Yorkshire, Ray has a share in a very recently restored - Piper PA12 at Breighton. G-BSYG is back in the air after a 12 month rebuild and is probably better than when she left the factory !

Please have a look at my other post as I am coming up to speed on Nippers quickly - I do the T'internet thing, Ray is far too old for all of that Cool

Neil Spooner
Posts: 504
Location: Ardleigh, Colchester, Essex, UK
Contact:

Re: G-AVKI

Postby Neil Spooner » Sat Oct 18, 2008 7:35 am

Hi Mike,

How is the Nipper progressing? Looking forward to seeing another take to the skies.

Neil
A little help goes a long way.
Nipper G-ONCS and G-BALS
RV4 G-IKON

G-AVKI
Posts: 4

Re: G-AVKI

Postby G-AVKI » Sun Aug 13, 2017 10:33 pm

Hi, I have just purchased G-AVKI (from Mick Greenway who has owned her twice now).

Haven't flown her yet as waiting to upgrade from a microlight license (have been flying a Eurostar for the last couple of years).

Happy to receive any advice etc. to make ownership an enjoyable experience as all I get asked by anyone at the moment is if I have seen the twenty six spin on you tube!

Currently based at Henlow but will be over in Wiltshire once I feel comfortable flying her.

First job on the agenda is to fit new Nieman rings or bungees, any thoughts please?

Pete

Neil Spooner
Posts: 504
Location: Ardleigh, Colchester, Essex, UK
Contact:

Re: G-AVKI

Postby Neil Spooner » Sat Dec 09, 2017 12:38 am

Hi Pete,
Have a look at: https://www.youtube.com/watch?v=0bf6xhwFS_g
Also: viewtopic.php?t=497
I have loaned my u/c tool to someone, cant remember who, and they have not returned it!
Neil
A little help goes a long way.
Nipper G-ONCS and G-BALS
RV4 G-IKON

User avatar
G-NIPR
Site Admin
Posts: 204
Location: INVERNESS, SCOTLAND
Contact:

Re: G-AVKI

Postby G-NIPR » Mon Jan 15, 2018 10:28 am

I have just seen that AVKI came a cropper in December, another victim of the runaway after start up scenario.
I had a long chat with Peter about this potential at Sywell in September.
He had developed a tether system.
I have emailed my best regards to him, and invited him to fill us in with the details if he feels up to it.
I note from GINFO that he has sold it on. I hope the new owner gets her flying again soon.
Bugger.

JimCrawford
Posts: 55

Re: G-AVKI

Postby JimCrawford » Tue Jan 16, 2018 4:31 pm

Safer propswinging article already sent to LAA mag as a result of the two aircraft runaways described in December issue

Jim

wilyflier
Posts: 11

Re: G-AVKI

Postby wilyflier » Mon Feb 12, 2018 5:55 pm

Hi,
Anyone know whereabouts G-ATUH is now stored ,?
(possibly Midlands back of hangar?)
Or of up to date contact number, address or Email of owner Harry Abrahams?

Please, thanks..... Vince Hallam 07941313141 vince@devonwindmills.co.uk

G-AVKI
Posts: 4

Re: G-AVKI

Postby G-AVKI » Sun Oct 28, 2018 7:28 pm

Hi, Pete here, last owner of G-AVKI until the ‘runaway after start up’ last October!

Now the proud owner of G-AXLI (I will change my forum name shortly).

I bought G-AXLI in September 18 and after a successful registration and permit following its return to flying after a four year hibernation, assisted by the former owners, I logged a few hours of happy flight but noticed an increase in difficulty to start each time.

Yesterday, one mag failed. It has a pair of Lucas SR4 magnetos. I’ve done basic fault finding and confirmed that there is no spark available from the brass nipple that the spring in the distributor cap contacts on the winding.

Does anyone have any SR4 mags for sale after having replaced theirs with Leburgs please? I want to try and stick with the SR4s for a while longer.

I would welcome feedback on likely cause of mag failure as these were rewound by a reputable company around 40hours ago. i.e. types of HT lead and plug cap to use?

Thanks, Pete


Return to “THE PILOTS”

Who is online

Users browsing this forum: No registered users and 0 guests