Fitting a starter motor

Use this forum to discuss technical points relating to the Nipper and its ancilliaries.
Chopperman62
Posts: 5

Fitting a starter motor

Postby Chopperman62 » Thu Dec 15, 2022 10:18 am

Is it possible to fit a very light(ened) flywheel and starter motor to the VW engine? This is fitted in a Slingsby glider without a flywheel and the engine is close to the fire bulkhead

JimCrawford
Posts: 145

Re: Fitting a starter motor

Postby JimCrawford » Mon Jan 23, 2023 2:20 pm

If you are thinking of adding a starter to a VW engined Nipper then I suggest you investigate the weight and balance implications of the starter, flywheel, battery capable of turning over the VW (including it's mounting structure) and associated wiring. You may find the resulting weight and balance calculation illuminating at least and probably prohibitive.
From my work fitting a Leburg system I am clear that adding any weight to a Nipper bites into the pilot and fuel carrying ability and is not to be undertaken lightly.
You are most unlikely to improve a very light aircraft by adding weight.

Jim


Return to “ENGINEERING AND MAINTENANCE”

Who is online

Users browsing this forum: No registered users and 2 guests